How to Buy Shower Enclosure Kit?

Shower room is a bathroom ramification that many people design now in a new house. When designing shower room, you need to pay special attention to the shower enclosure kit. Shower enclosure kit is too tiny to notice, but it is really much learning.

• What does shower enclosure kit have?

• How to buy shower enclosure kit?

• How to maintain shower enclosure kit?

What does shower enclosure kit have?

The frame edge of shower enclosure kit is mainly divided into aluminum alloy and stainless steel. Stainless steel is acid-base resistant and has better quality. However, not all stainless-steel shower enclosure kits are high-grade goods.

Stainless steel shower enclosure kit and aluminum alloy shower enclosure kit can use with 8-12mm thick tempered glass.

The track is also a technical activity for purchasing shower enclosure kits. It is best to choose 304 stainless steel pulleys, followed by copper material. As for alloy material, it is easy to rust and fall off after a long time.

How to buy shower enclosure kit?

Shower enclosure kits mostly are made of different materials, including copper, stainless steel, aluminum and copper zinc alloy. All copper and aluminum not recommended because the former is expensive and the latter is easy to oxidize. Stainless steel 304 shower enclosure kit has high durability and beautiful appearance. The light articles are available in hollow pipes.

Generally speaking, the brighter and delicate the surface of shower enclosure kit, the more obvious the mirror effect, and the better the coating process.

Listen to the introduction of several brand shopping guides, mainly the introduction of the coating shower enclosure kit. Good shower enclosure kit has not only experienced the early grinding, polishing and dust removal, but also up to six layers of nickel plating and chromium plating processes. The more the coating, the better the quality of shower enclosure kit.

You can use the grip method to see whether the shower enclosure kit is good or bad. Some businesses will use cast iron to pretend to be all copper or copper zinc alloy. Hold the shower enclosure kit in hand for two or three seconds and release it. If the fog and trace disappear soon, it is copper. Otherwise, it is likely to be non-copper.  

How to maintain shower enclosure kit?

The model, specification and performance of shower enclosure kit shall comply with the relevant provisions of the current national standards and be matched with the shower room for supporting use.

Generally, the shower door of the shower enclosure kit adopts the push-pull method. If it is a sliding door with a width of more than 1m or a double-layer glass shower door, it is more suitable to set double pulleys or select rolling pulleys to ensure that the shower door is convenient and unobstructed.

Pay attention to prevent rust and corrosion after the installation of shower enclosure kit. Open and close gently in daily use to prevent damage caused by hard opening and hard closing.

When installing shower enclosure kit with fastening screws, a metal lining plate must be set inside. The thickness of the lining plate shall be at least twice the tooth distance of the fastener. It shall not be fastened on plastic profiles or non-metallic lining.

Jianlai Hardware (HK) Co., Ltd has a long history since 1998. It is provided with a research and development center and a detection system. The products are put into production after going through rigorous tests and reaching the national standard.