How to Install Glass Door Lock?

Glass doors are a beautiful way to let a lot of light into your home. Unfortunately, these doors may be a temptation for thieves. For additional protection, consider installing glass door locks on glass doors to keep your house safe. The glass door lock also allows you to use the glass door as the entrance.

• How to install glass door lock?

• How to improve the precision of glass door lock?

• How to fix glass door lock?

How to install glass door lock?

The glass door without package frame needs accessories to assist in installing glass door lock. The installation method is basically the same as the surface installation method of ordinary doors, except that when installing the relay iron plate in the third step, put the U-shaped groove together with the rubber cushion and stainless steel gasket that on the side of the locking screw on the glass door, lock it on the glass door with headless hexagon socket screw, and then fix the relay iron plate on the U-shaped groove.

Use the AB frame for install glass door lock. Fix the AB frame on the glass door with special glass glue or double-sided tape, and then fix the relay iron plate on the support.

How to improve the precision lock cylinder of glass door lock?

The precision of the lock cylinder is given by the design glass door lock. The higher the precision, the more reliable the quality of glass door lock. For manufacturers, the lock cylinder designed and produced by full digital design is much safer than the lock cylinder installed at will. The larger the contact surface between the glass door lock and the lock, the smaller the perforation gap, the smaller the gap between the lock cylinder plug and the shell, and the more reliable the lock cylinder is. Bruise the lock cylinder of the glass door lock with a contusion knife. If it requires lead powder and any lubricant, there must be a problem with the accuracy of the rough lock cylinder of the key.  

Anti-damage opening mainly comes from several settings, that are, anti-torsion setting, anti-knock setting and anti-drilling measures. The deeper the cross depth between the lock cylinder and the core plug of the lock cylinder, the higher the density, the stronger the anti-torsion ability, the better the reinforcement and protection of the lock cylinder, and the stronger the anti-knocking ability of the glass door lock.

How to fix glass door lock?

First, it is necessary to ensure that the glass door lock is adjusted in place. If the glass door lock is loose, you can add a screw on the diagonal black reinforcing plate and fix the lock firmly in place.

On the premise of ensuring that the glass door lock is firmly fixed in place, adjust the locking hook, and pay attention to be centered before tightening.

If it will pop up automatically, please add a 6mm flat gasket under the rubber of the glass door lock, or increase the length by straightening the bending part to make the glass door lock fully engage in place.

Loosen the glass door lock rod from the turntable, and then check whether the lock rod can clamp the turntable without force.

If it is necessary to pull the pull rod to clamp the rotary table, adjust the length of the pull rod so that it can clamp under no force. If the problem is not solved after the above adjustment, the glass door lock itself has been necrotic and should be replaced with a new one.

On the premise of ensuring the implementation of the above steps, there is no problem of adjustment in place.

Jianlai Hardware (HK) Co., Ltd are devoted to providing you with high-quality glass door locks and the best service. It is wise of you to choose us as your Chinese partner. We hope we can have a good cooperation.