Home » News » Product News » How do you adjust the closing force of a floor spring?

How do you adjust the closing force of a floor spring?

Views: 0     Author: Site Editor     Publish Time: 2024-11-06      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Adjusting the closing force of a floor spring can be a crucial task for ensuring the smooth operation of your doors. Whether you have a glass door automatic floor spring or a wooden door, understanding how to make these adjustments can save you from a lot of inconvenience. In this article, we will walk you through the steps to adjust the closing force of a floor spring, ensuring your doors function perfectly.

Understanding Floor Springs

What is a Floor Spring?

A floor spring is a mechanical device installed at the base of a door to control its closing speed and force. Unlike traditional door closers, floor springs are concealed within the floor, providing a more aesthetic and streamlined appearance. They are commonly used in commercial buildings and high-traffic areas.

Tools and Materials Needed

Essential Tools

Before you begin adjusting the closing force of your floor spring, gather the following tools:

  • Screwdriver

  • Adjustment key (usually provided with the floor spring)

Safety Precautions

Ensure you take necessary safety precautions, such as wearing gloves and protective eyewear, to avoid any injuries during the adjustment process.

Steps to Adjust the Closing Force

Step 1: Locate the Adjustment Screws

The first step in adjusting the closing force of a floor spring is to locate the adjustment screws. These screws are typically found on the top or side of the floor spring mechanism. Refer to the manufacturer's manual for the exact location.

Step 2: Adjust the Closing Speed

Using a screwdriver, turn the adjustment screw clockwise to increase the closing speed and counterclockwise to decrease it. Make small adjustments and test the door after each turn to achieve the desired speed.

Step 3: Adjust the Closing Force

Next, locate the screw responsible for adjusting the closing force. This screw is usually labeled and can be adjusted using the provided adjustment key. Turn the screw clockwise to increase the closing force and counterclockwise to decrease it. Again, make small adjustments and test the door after each turn.

Step 4: Test the Door

After making the necessary adjustments, open and close the door several times to ensure it operates smoothly. Pay attention to the speed and force with which the door closes. If further adjustments are needed, repeat the previous steps until you achieve the desired performance.

Common Issues and Troubleshooting

Door Closes Too Quickly

If your door closes too quickly, it may indicate that the closing speed or force is set too high. Adjust the screws accordingly to reduce the speed and force.

Door Does Not Close Completely

If the door does not close completely, the closing force may be too low. Increase the closing force by turning the adjustment screw clockwise.

Uneven Closing

If the door closes unevenly, it could be due to misalignment or uneven floor surfaces. Ensure the floor spring is properly aligned and the floor is level.

Conclusion

Adjusting the closing force of a floor spring is a straightforward process that can significantly improve the functionality of your doors. Whether you have a glass door automatic floor spring or a wooden door, following the steps outlined in this article will help you achieve the perfect balance of speed and force. Regular maintenance and adjustments will ensure your floor spring continues to operate smoothly for years to come.

 : +0086-0757-87724332
 : Admin@jinhuida-hardware.com
  +0086-18825152441(Mr. JK)
: No. 13, Jinyuan Middle Rd, Jintao Industrial Park, Jinli Hightech District, Zhaoqing City, Guangdong Province, China

NAVIGATION

CONTACT US

Contact us
Copyright © 2021 JianLai Hardware (HK) Co.,Ltd. All Rights Reserved. Sitemap