Views: 0 Author: Site Editor Publish Time: 2023-03-15 Origin: Site
Floor springs ensure that your door closes itself when it is opened. In terms of convenience and safety, floor springs are as good as overhead door closers. All individual components are built into the floor or door. Floor springs are ideal when the door design should be as inconspicuous as possible.
How to adjust floor spring?
How to install floor spring?
What should be noticed when using floor spring?
Prepare relevant tools that are a wrench and a screwdriver. When adjusting floor spring, open the cover, and you will find that there are two screws in it. The functions of these two screws are different. One screw is used to adjust the speed of closing the door, and the other screw is used to control the speed of latching. Both screws are installed independently.
Use a screwdriver to turn the screw so that the speed of the spring can be adjusted.
Put the floor spring of the glass door into the corresponding hole, and pay attention to straightening it.
You can adjust the screws in three directions of the floor spring of the glass door. Then, keep the door vertical, so you can adjust the speed of opening or closing the glass door. Adjust it to the appropriate range, and screw on the cover of the floor spring.
The installation accuracy of floor spring has a great influence on its service life. The quality defects of the floor spring mainly include oil leakage of the body and eccentricity of the ground shaft. The oil leakage is caused by the casting process of the floor spring. If sand holes are caused during the casting process, the hydraulic pressure inside the body will increase after installation, resulting in oil leakage. The eccentricity of the ground axis can cause the door body to deviate from the center line of the door leaf after installation. It is best to contact the manufacturer for replacement. The end of the life of the floor spring is the oil leakage of the axis and the weakening of the elastic force.
Draw a line so that the center of the rotating shaft of the floor spring coincides with the rotating shaft of the door clamp.
Open holes on the ground according to the instructions and physical objects. The size of the holes shall be matched with the floor spring shell and shall not be loose.
Put the floor spring into the opened hole and straighten it.
Lift the door leaf with the door patch fitting installed, and insert the rotating shaft of the floor spring into the rotating shaft hole of the door leaf.
Adjust the screws in three directions of the floor spring to keep the door leaf vertical and the up and down rotation axes coincide.
Adjust the speed of closing the door.
Close the floor spring trim cover.
If the closing speed of floor spring is too fast, adjust the speed regulating button in time. If there is no response, check whether the floor spring leaks oil to replace it in time.
If the floor spring leaks oil, it should be replaced in time. Please do not continue to use it because there are potential safety hazards.
The door leaf is only opened in one direction. Any man-made strong closing action will lead to the damage of internal components of floor spring, resulting in the damage of one-way door opening. Therefore, it is better to close the door automatically.
If the two door leaves are misaligned, check whether the lower box of the floor spring is fixed on the cement floor, and adjust buttons.
It is forbidden to grind the central spindle head of the floor spring without authorization.
Jianlai Hardware (HK) Co., Ltd has a long history in manufacturing high-quality floor springs, together with shower hinge, glass door lock and so on. It is wise of you to choose us as your Chinese partner to explore Chinese market.
