Views: 0 Author: Site Editor Publish Time: 2023-06-10 Origin: Site
There are many shower enclosure kits in the bathroom, such as shower, towel rack, floor drain, faucet, etc., which play an important role in our life. It’s popular model of shower enclosure kit for shower cabin. Our shower enclosure kit is suitable for 8-12mm tempered glass.
What are the common faults when using shower enclosure kit?
How to clean shower enclosure kit?
How to install shower enclosure kit?
The spanner or screw of shower enclosure kit has sliding teeth. The possible reason is that the installation force is too large, or the screw thread is not good during screw processing.
Shower enclosure kits are difficult to assemble. The possible causes are incorrect installation method and dimension deviation.
shower enclosure kits are scratched or bumped. The possible cause is the quality problem of the shower enclosure kit or the damage during transportation.
Soldering spot of shower enclosure kit is desoldered. The possible reason is that the excessive force during installation leads to fracture. The solder joint is not firm.
There are many spots on the surface of the shower enclosure kits. It may be because the shower enclosure kits have been in the bathroom for a long time where the air is humid.
The shower enclosure kit is deformed, caused by extrusion deformation during transportation, or excessive force during installation.
The coating of shower enclosure kits blisters and peels. The polishing and electroplating process is not in place.
It is difficult to install shower enclosure kits. There is a problem in the structural design. The installation method is wrong. The processing is not good.
Most shower enclosure kits in the bathroom are made of stainless steel. After a period of use, the surface gloss will be significantly reduced that fog or surface hair will appear, which will seriously affect the appearance of shower enclosure kit. The reason is that the scale in the bathroom is attached to the surface of the shower enclosure kit.
You can squeeze a small amount of toothpaste onto it, then gently brush it with a toothbrush, rinse it with water, and polish it with a dry cloth.
The surface of the stainless steel shower enclosure kit cannot be wiped with a steel ball, which will leave irreparable scratches.
Avoid direct sprinkling of strong acid and alkali solution on shower enclosure kit, if any, wipe it immediately in case of accident. Avoid using any abrasive cleaner, cloth or paper towel, any detergent containing strong acid and alkali, and polishing pigment to wipe the surface of shower enclosure kit. Develop the habit of opening doors and windows to keep the air in the bathroom smooth. Separate dry and wet shower enclosure kit as possible as you can.
The installation of shower enclosure kit shall conform to ergonomics and be convenient for use. During installation, all shower enclosure kits must be neat and consistent. The length of all screws shall match the thickness of shower enclosure kits. When drilling with an electric drill, the hole diameter shall be consistent with the screw diameter.
Generally, two 100mm long hinges are installed on the door. If the door is solid or concave convex, three hinges must be used, or two 125mm long hinges must be installed.
After the door lock is installed, its handle shall be 900 mm to 1000 mm from the ground. Install the lock body and latch to make the latch plate flush with the door edge, close the door, fix the position of the latch plate, and then install the latch plate to ensure that the latch plate is flush with the door pocket edge.
Jianlai Hardware (HK) Co., is good at manufacturing high-quality shower enclosure kits and providing the best services. We are equipped with several professional experts and precise machines, devoting to offering the best purchasing experience.
