Views: 0 Author: Site Editor Publish Time: 2023-04-13 Origin: Site
Pool fence spigots are widely used in swimming pool fences. Now more and more people begin to use pool fence spigots and glass railings on balconies. In fact, pool fence spigot has been favored by many construction workers, saving a lot of construction costs.
How to install pool fence spigot?
How to store pool fence spigot?
How to clean pool fence spigot?
Mark the centerline of the proposed pool fence spigot with chalk line.
Determine the fixture position according to the drawing size of pool fence spigot.
Use the base plate as a template to mark the position of the hole of pool fence spigot and drill holes to fit.
Install the socket on the floor and connect the pipe with gasket to tighten firmly, because the minimum movement on the base plate will cause obvious movement at the bottom of the pool fence spigot.
After all sockets are installed, slide the dome over the top of the sleeve to hide the fixings.
Then install the glass on the socket. Place the plastic packer between the glass sleeves and do not touch the metal at any stage.
Keep the storing environment of pool fence spigot clean. Ensure that the warehouse is clean, the drainage is smooth, and be away from factories that produce harmful gases or dust.
Being independent to store pool fence spigot. Make sure there are no corrosive substances, such as acid, alkali, salt and cement, which will corrode pool fence spigot. Of course, both indoor and outdoor areas should be stored separately according to different categories, which should not only avoid corrosion, but also facilitate access.
Do some protection for pool fence spigot. It is best to store pool fence spigot indoors. However, whether stored indoors or outdoors, we should pay attention to and protect pool fence spigot by doing some protection.
Ordinary warm water and soap can remove fingerprints and stains of pool fence spigot to restore luster. Just make sure your cleaner is chloride-free. If you have any questions about this, most hardware and large stores have cleaners that are particular for pool fence spigot. This is the least risky option for cleaning pool fence spigot. Wipe dry with towel or cloth to prevent water spots. Wipe in the direction of the light.
If the pool fence spigot has corrosion marks or pollution marks, or it has been a long time since the last cleaning and requires more power cleaning, mild detergent and warm water can do well without damaging the pool fence spigot. Make sure to wash the surface thoroughly with a towel to prevent staining and spots, which may be caused by minerals such as calcium in the water.
Fingerprints are one of the biggest complaints about pool fence spigot. But they can be taken care of by using glass cleaner. Rinse thoroughly and dry with a towel.
Jianlai Hardware (HK) Co., Ltd are good at manufacturing pool fence spigot and other stainless steel products. We are devoted to providing you with the best service and purchasing experience.
