What Is The PVC Waterproof Strip Installation Process?

PVC waterproof strip is mainly used for waterproof of buildings and roofs. Because PVC waterproof strip l is very easy to install, strong enough with great tensile strength and has a long service life, all these bring it to a higher level than the asphalt roof material, especially considering that PVC waterproof strip needs continuous maintenance and repair.

• Main advantages of PVC waterproof strip

• PVC waterproof strip installation process

• Notes before using PVC waterproof strip

Main advantages of PVC waterproof strip

PVC waterproof strip is one of the latest high-tech solutions for waterproof of roof and foundation. Unlike asphalt materials, PVC waterproof strip have higher:

• strength;

• Elasticity and tightness;

• Weld strength (at the junction of plates);

• Atmospheric and chemical resistance;

• Vapor permeability at 100% water resistance;

• Wind load resistance;

• Antifreeze;

• Resistance to temperature changes;

• Precision of complex element execution;

• Resist the movement of building structural elements;

• Oxidation resistance and ultraviolet light;

• High durability;

• Quick installation;

• Fire resistance;

• Color diversity.

PVC waterproof strip installation process

After preparing the foundation, lay the drainage geotextile. The roof is then further insulated with foam polystyrene or basalt wool. You can then start installing the membrane coating.

It is used to waterproof the structure with PVC waterproof strip, and special hot air welding machine and building dryer are used. Welding is carried out through hot air using automatic equipment, which optimizes temperature, speed and pressure. Using manual dryer for welding is suitable for joints and places where the machine cannot be used.

This technology of bonding two waterproof boards ensures the reliability of the joint and completely sealed surface. The average service life of PVC waterproof strip is 30 years, depending on the manufacturer and installation quality. The installation of PVC waterproof strip is carried out on the first floor, which has a positive impact on the cost of the work. Another advantage of PVC waterproof strip is that it can be installed in wet and cold weather. For the continuity of PVC waterproof strip, special laminate is used. Lamination is carried out by spraying PVC on the metal surface. When the film is welded to the laminate, we get an unbreakable boulder.

Notes before using PVC waterproof strip

If PVC waterproof strip is too large or too high, it will increase the resistance of the glass sliding door to move; while too small too low of PVC waterproof strip will easily make the glass sliding door move out of the slot, reducing its sealing capacity. The PVC waterproof strip must be silicified that the qualified PVC waterproof strips have a smooth appearance and are not bent.

PVC waterproof strip should not be stretched too tight. Installation should also be inlaid in place with close contact to the notch. The PVC waterproof strip at the corner should be used as the interface of the inclined plane and glued tightly.

Before installing PVC waterproof strip, carefully remove the debris in the notch, such as mortar, brick chips, and wood blocks. When the glass sliding door is placed, it should be carefully calibrated to ensure that the gap on both sides is uniform and prevent collision displacement and deviation from the center of the notch.

Jianlai Hardware (HK) Co., Ltd’s annual production capacity is more than 100000 sets. We can meet the needs of different customers and purchase different quantities. After years of efforts, we have rich experience in the production of PVC waterproof strip.